Running Toilet Repair Tips That Can Help You

October 23, 2015

Running Toilet Repair Tips That Can Help You

Introduction

Toilet Cross SectionRepairing a running toilet is not a difficult task, and you can fix this issue without having to call for assistance from a professional plumber. However, there are a few things that you need to do to make sure that you repair this issue without causing more damage to the toilet. Furthermore, you also need to identify the source of the problem before you can start fixing the toilet.

Various Causes Of A Running Toilet

The major cause of a running toilet is a damaged flapper. If the flapper is damaged or malfunctioning, then the water will not fill the toilet’s tank. Another cause of a malfunctioning flapper is a loose chain and non-responsive wedge. That means you need to check on this parts to make sure that the flapper is aligned properly, and the rest of these parts are working efficiently.

Another cause of running water is intermittent filling. If the tank filling is not working properly, then your toilet might start leaking slowly. You can use various solutions to confirm whether the tank filling is working properly of not. If it is not working, then you might be required to make the necessary to your tank to make sure that there are not leaks

Running Toilet Repair Tips

The first thing that you need to do is find out where the leak is coming from. Before you start checking on the flapper, make sure that there are no spaces of leaking water. That is because, apart from intermittent filling, water may also leak because of mineral deposits that may have entered the tank as well as the valve. That is why it is recommended that you clean your water tanks after a short period to get rid of unwanted waste products.

If there are any mineral deposits inside the tank or valve, then you need to remove them using water solution or bleach. However, if there are not waste deposits inside the tank or the valve, then you need on the rubber seals that are found inside the tank. Damaged rubber seals also cause the toilet to overflow. The rubber seals are usually connected with the flapper as well as the flush valve. However, being able to identify the rubber seals might be difficult for you since there are other components attached to these parts of the tank. Moreover, malfunction on any of these components may cause the problem to persist. Because of this reason, you need to check on these parts as well to make sure that they are aligned properly and working as they should.

More Running Toilet Repair Tips

Some of these parts consist of the chain, the float, and the lever. All these components are small in size and easy to handle. You can use a manual guide to confirm that everything is in its rightful place. Furthermore, if any of these parts is not working properly or damaged, then you can replace the necessary components at an affordable cost.

Once you have replaced the damaged parts, you can proceed on to check whether the water is still overflowing. If the problem is not fixed, then you might want to double-check everything from the starting point again to make sure that all the parts are working properly. This is much easy to do since it will not be necessary for you to dismantle any of the parts.

Conclusion

You can use these running toilet repair tips to fix your toilet without the help of an expert. However, if you do not manage to solve this problem, then you might want to hire a professional plumber because you can lose gallons of water as the toilet continues to overflow. Plumbing services are reliable but can be expensive at the same time.

Below is a video on repairing a clogged toilet